Network Installation Overview

Network Installation Overview:
If you will be installing QwikQuote on a network, choose one workstation and complete the entire install procedure on that chosen workstation.
Right click on Start > Explore.

Here you will see I have created a folder on my server by the name of QQTest on the D: drive:

Copy the QwikQuote Setup file 6.3.009 to your QQTest, and then run it.
QwikQuote will then install the program to that location.

Your Explorer now has QwikQuote installed:

Now go to Start > All Programs > QwikQuote 6 > Setup Wizard

Setup this as a Network Server and point to the Shared Directory in this case D:\QQTest. Hit the Config Button, it is grayed out here because it is not a real Serial Number.

Note: you may run this as a Network even if you do not have a Serial Number, in that case make sure you check the Free Trial Box. Click on the Config Button. At times you my encounter a “Can’t find Setup File” this may be the result of the place your downloaded the setup file to. Just click OK and it will find the right location.
Again, it would be best to copy your setup file to the QQ6 Server folder

you setup in my case the D:\QQTest.
You will see QwikQuote network server license is configured successfully.

You will then be asked if you want to configure this workstation to run QwikQuote.

After it successfully sets the Network Client Workstation you will be asked if you want to run QwikQuote now.

Congratulations you are done.